{"product_id":"peugeot-boxer-fiat-ducato-citroen-jumper-sliding-window-pinch-latch","title":"Peugeot Boxer, Fiat Ducato, Citroën Jumper \/ Relay Sliding Window Pinch Latch – Fits 8569HT, 8569HV, 8569HY, 8569JA – Reinforced Carbon-Fibre Plastic","description":"\u003cp\u003eSnapped the pull tab on your van’s sliding side window? You’re not alone. The original latch on older \u003cstrong\u003ePeugeot Boxer, Fiat Ducato and Citroën Jumper \/ Relay\u003c\/strong\u003e windows is a thin moulded part that goes brittle with age, and it’s rarely sold on its own. That usually leaves you hunting for a used one or pricing up a whole new window. This set replaces it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWindow part numbers\u003c\/strong\u003e\u003cbr\u003eThis latch matches the sliding side windows fitted to many Boxer, Ducato and Jumper minibuses, sold under these replacement-window part numbers:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSide\u003c\/th\u003e\n\u003cth\u003eClear glass\u003c\/th\u003e\n\u003cth\u003ePrivacy \/ tinted glass\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeft\u003c\/td\u003e\n\u003ctd\u003e8569HT\u003c\/td\u003e\n\u003ctd\u003e8569HV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRight\u003c\/td\u003e\n\u003ctd\u003e8569HY\u003c\/td\u003e\n\u003ctd\u003e8569JA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA matching number is a good sign, but please still compare your latch with our photos before ordering (see below).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStronger where the original breaks\u003c\/strong\u003e\u003cbr\u003eWe redesigned the latch with extra material around the sections that crack, while keeping the shape and movement the window needs. It’s printed in a high-temperature, carbon-fibre-reinforced engineering plastic, and it has been tested in daily use on school buses, where the windows get opened and slammed far more than on any camper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePinch latch, pull tab, window clip: same part\u003c\/strong\u003e\u003cbr\u003eNobody seems to agree what this part is called. If you pinch or pull a small tab to release your sliding window, and the tab looks like the one in our photos, this is the one you’re after.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the shape before you order\u003c\/strong\u003e\u003cbr\u003eDifferent window makers and conversions fitted different latches, even on the same van, and windows are sometimes replaced with a different make over the years. So please compare your latch with our photos: the overall shape, the openings, the mounting points and the pull handle must all match. Don’t go by the registration, model name or part number alone. Not sure? Send us clear photos of your old latch (front and back), the broken bit and the window frame, and we’ll check it against ours before you buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003cbr\u003eRemove the broken latch carefully and fit the new one in the same position and the same way round. Don’t force, twist or sharply bend the long arm while fitting. If you’re not sure how your window mechanism goes together, a professional fitter is the safer bet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow it’s made\u003c\/strong\u003e\u003cbr\u003e3D-printed in carbon-fibre-reinforced plastic by our family-owned business in the UK. It has a fine matte black, lightly textured finish. Fine layer lines and small surface variations are normal for 3D printing and don’t affect how it works. Because of the extra reinforcement, it can look slightly chunkier than the original part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the set\u003c\/strong\u003e\u003cbr\u003e1 × reinforced pull latch, 1 × compression spring, 1 × matching latch cover. The window, frame and original broken part shown in the photos are for identification only and aren’t included.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis is an aftermarket replacement, not a genuine Peugeot, Fiat or Citroën part. Manufacturer names and window part numbers are used only to describe fit.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Mars Outpost","offers":[{"title":"Default Title","offer_id":59035155890520,"sku":null,"price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3847\/0744\/files\/1_2b07d869-ea5d-4701-ad13-3663152fd21f.jpg?v=1793793372","url":"https:\/\/marsoutpost.net\/products\/peugeot-boxer-fiat-ducato-citroen-jumper-sliding-window-pinch-latch","provider":"Mars Outpost","version":"1.0","type":"link"}