Blink Doorbell Wedge Kit – Adjustable 25–55° Corner Angle Mount, Set 30° or 45°, No Drill, Fits All Blink Video Doorbells

How it fits: step-by-step installation guide, with photos.

Pointing at the wrong spot? If your Blink doorbell stares at the wall, the fence or next door instead of whoever's at the door, an angle wedge fixes it in a couple of minutes — no new doorbell, no re-wiring.

We designed this wedge so you can choose the angle your Blink faces: anywhere from 25° to 55°, to the left or to the right. It adjusts smoothly, so you are not limited to fixed steps: open your doorbell app, turn the wedge until the picture shows your path, then tighten the 4 screws and the angle locks. 30° and 45° for a corner are both in the range. The adjustment is side to side only, so it moves the view across the front of the house rather than up or down.

Fitting it in a corner? Set it to 45° and your doorbell points straight out of the middle. 30° is in the range too, so one part covers both settings people usually look for.

Two ways to fit it

• No drilling — a strong 3M VHB adhesive pad. It grips firmly, but only on a smooth, clean, solid surface (glass, uPVC, vinyl siding, painted metal, glazed tile). Wipe the spot with rubbing alcohol and let it dry first. It won't hold on painted or bare wood, crumbly render, dusty walls, flaky or peeling paint, or rough textured brick — screw-fix those instead. Great for renters.
• Screws — for a permanent, weatherproof hold on any surface. All fixings are in the box.

Step-by-step installation guide

Every step photographed, for both fitting methods: read the full installation guide — the adhesive pad route, the screw route, and how to cut the cable tabs if your doorbell is wired.

Printed in heavy-duty UV-stable PETG plastic so it won't yellow or crack in summer sun, with stainless steel doorbell screws and washers that won't rust.

It is plastic, not metal — and that is deliberate. PETG will not corrode, and it will not sit between your doorbell and its wireless signal the way a metal mount can.

There are also eight stainless steel washers, in two sizes, in the kit, for the doorbells that need them. Some back plates have screw holes a little too big for the screw, so the head pulls straight through instead of holding. A washer under the head sorts that out. They will not fit every doorbell — on plenty of models there is simply no room for one — so use them if yours needs them, and keep them in the bag if it does not.

It also has easy-to-cut cable tabs for wired doorbells.

It's universal by design, so on some doorbells it may sit a little taller or wider than the device. That's normal for a one-size-fits-many part and doesn't affect how it works or how securely it holds — just don't expect it to match your doorbell's exact outline.

Fits every Blink doorbell

Compatible with all Blink video doorbells — the Blink Video Doorbell (1st and 2nd Gen), the Battery Doorbell 2K+ and the new Wired Doorbell 2K+. It's universal by design, so it also fits Eufy, Aosu, Arlo, Ring, Google Nest, Netatmo, Reolink, Tapo and Wyze doorbells — keep it if you ever switch brand.

In the box

• 1 x Adjustable Wedge Mount
• 1 x Adhesive Pad
• 4 x Small Stainless Steel Screws for Doorbell
• 8 x Stainless Steel Washers (2 sizes)
• 4 x Wall Screws with Wall Plugs

Eight screws in total, in two sets, so count them before you think something is missing: the four small ones fix your doorbell to the wedge and lock the angle you have set, and the four longer ones go into the wall with their plugs. The doorbell itself and its original manufacturer back plate are not included — this part replaces how your doorbell fixes to the wall, it isn't a spare factory bracket.

How and where it’s made

3D-printed in PETG by our family-owned business. UK orders are made and dispatched from our Bristol workshop. Minor surface variations are a normal part of the 3D-printing process and do not affect function.