How to Change the Angle of a Google Nest Doorbell

A Google Nest doorbell has a fixed lens. It films straight out from whatever it’s mounted to, so if the wall sits at an angle to your path, the camera points at the wall, the fence or the neighbouring house instead of at your visitor. There is no angle setting in the Google Home app to fix that. An adjustable wedge mount does — it rotates the doorbell 25° to 55° to the left or right, without moving or re-drilling the existing fixing.

Why your Nest doorbell points the wrong way

This is almost never a camera fault. It’s geometry. The doorbell was fitted where the old bell or the existing wiring already was, and that position rarely faces the direction people actually approach from.

• The doorbell is beside the door, but the path arrives from one side. Visitors are caught in profile, or only appear once they’re directly in front of the lens.
• The doorbell faces a side wall, a porch return or a corner. You get a close-up of brickwork.
• The doorbell is on the opposite side of the door to the path. Motion alerts trigger late, because people enter the frame at the last moment.

Nest is a little less forgiving than most here. The newer Nest Doorbells film in a tall portrait view — excellent for seeing a parcel left on the step, but narrower left to right than a typical landscape camera. Aim it 30° off and you lose more of the useful frame than you would elsewhere.

How the adjustable wedge works

The wedge fits between the doorbell’s back plate and the wall, turning the whole unit horizontally so the lens aims along the path rather than across it.

• Rotates left or right — so it works whether your doorbell is mounted on the left or the right side of the door.
• 25° to 55°, with printed degree markings — you choose the angle instead of being locked to one fixed position.
• Horizontal adjustment only. It turns the doorbell side to side; it does not tilt it up or down.

See it working

Fitting it

1. Check the live view first. Hold the doorbell where it will sit and open the Google Home app. Note which way it needs to turn — left or right — and roughly how far.
2. Set the angle using the printed degree markings. A shallow angle suits a path that’s slightly off-centre; a steeper one suits a doorbell facing square into a wall.
3. Fix the wedge to the wall. Use the supplied screws and wall anchors, or the 3M VHB adhesive pad on a clean, smooth surface. Wipe the surface with isopropyl alcohol first.
4. Refit the doorbell onto the wedge using the supplied stainless steel screws and washers, then re-check the live view before you finish.

For wired Nest doorbells, the wedge has easy-to-cut cable tabs so the cable routes through neatly. If yours is a battery Nest Doorbell, take it off the wall first — it’s far easier to set the angle with the unit in your hand than at arm’s length on the wall.

Compatibility

Fits all Google Nest doorbell models:

• Nest Hello (Wired, 1st Gen)
• Nest Doorbell (Battery)
• Nest Doorbell (Wired, 2nd Gen)
• Nest Doorbell (Wired, 3rd Gen — 2K)

The same wedge also fits Eufy and Blink doorbells — worth knowing if you ever switch brand, because the mount stays on the wall. Ring doorbells are a different size and take a different mount, so we cover those separately. See all Google Nest doorbell accessories.

Frequently asked questions

Can you change the angle of a Nest doorbell?
Not on the doorbell itself — the lens is fixed and there is no angle setting in the Google Home app. You change the angle by mounting the doorbell on an angled wedge, which rotates the whole unit 25° to 55° left or right.

Does the wedge angle the doorbell up or down?
No. This wedge adjusts horizontally only, turning the doorbell left or right. It solves a doorbell aimed at the wrong side; it will not correct one mounted too high or too low.

Does it work if my doorbell is on the left of the door?
Yes. The wedge can be angled either left or right, so it suits doorbells on either side of the doorway.

Does it fit the battery Nest Doorbell as well as the wired one?
Yes. The same wedge fits the battery Nest Doorbell, the wired 2nd and 3rd Gen, and the original Nest Hello. The wired versions use the cable tabs; the battery version simply sits on top.

Do I need to drill new holes?
No. The wedge fits over your existing fixing, and includes a 3M VHB adhesive pad for a no-drill installation on clean, smooth surfaces such as uPVC, glass, sealed wood or tile. Screws and wall anchors are supplied for brick, render or textured surfaces, where adhesive will not hold reliably.

What is included?
The wedge, screws and wall anchors for fixing it to the wall, stainless steel screws and washers for fixing the doorbell to the wedge, and a 3M VHB adhesive pad. The doorbell and its original manufacturer back plate are not included — the wedge works alongside your existing back plate.

Will it survive outdoors?
Yes. It is printed in UV-stable PETG rather than PLA, so it resists heat and sunlight without warping or yellowing.

Does it fit other doorbell brands?
Yes — the same mount fits Eufy and Blink doorbells as well as Google Nest. Ring doorbells need a different size, which we make separately.

An honest note

Because this is a universal part, on some Nest models it sits slightly wider or taller than the doorbell itself. That is cosmetic and does not affect how securely it holds.

You may also see faint layer lines across the surface. These are a normal result of the 3D printing process, not a fault — every printed part has them to some degree, and they have no effect on strength, weather resistance or fit. We would rather explain that up front than have it come as a surprise.

If the angle still isn’t right, contact us and we’ll help you work out what will. There’s also a version of this guide for Blink doorbells.

Designed and printed in our own workshop — if you need something custom, take a look at our 3D printing service.