A wedge that turns your Ring doorbell to face the path, the gate or the steps instead of staring at the wall opposite. It sits between the doorbell's own back plate and the wall, so nothing about your existing fitting changes.
What it does
-
Turns the view left or right. The adjustment is side to side only - it does not move the doorbell up or down. Clear degree markings run from 25 to 55 degrees, so you can set the angle you want and repeat it exactly. The wedge is symmetrical, so the same part turns the view left or right.
-
Fits a corner at 45°. Set it to 45° and your doorbell points straight out of the middle of the corner. 30° is in the range too, so one part covers both settings people usually look for.
-
Keeps your existing back plate. The wedge goes behind the plate your Ring already came with, so you are not replacing anything.
-
Two ways to fix it. Stainless steel wall screws and plugs for masonry, or the 3M VHB adhesive pad if you would rather not drill - uPVC, glass, tiled porches, rented flats.
-
Made to live outside. Heavy-duty UV-stable PETG plastic with stainless steel hardware, so it will not yellow or go brittle after a couple of British winters. It is plastic, not metal - and that is deliberate. PETG will not corrode, and it will not sit between your doorbell and its wireless signal the way a metal mount can.
-
Washers for the plates that need them. Some doorbell back plates have screw holes a little too big for the screw, so the head pulls straight through instead of holding - the eight stainless steel washers, in two sizes, sort that out. They will not fit every doorbell, as some models leave no room for one, so use them only if yours needs them.
Who it suits
Narrow porches, doors set into a recess, doorbells fitted on the wrong side of the frame - anywhere the camera currently shows you a hedge while the delivery driver walks past out of shot.
Fits
All Ring video doorbells - Video Doorbell 2nd Gen, 3, 3 Plus, 4, Wired, Pro, Pro 2, Battery Doorbell Plus and Battery Doorbell Pro - plus Aqara G4 and G410. This is our Regular wedge. If you have a Nest, Blink, Eufy, Arlo, Reolink or Tapo doorbell, our Slim wedge is the one you want. Doorbell not included.
In the box
- 1 x Adjustable Wedge Mount
- 1 x Adhesive Pad
- 4 x Small Stainless Steel Screws for Doorbell
- 8 x Stainless Steel Washers (2 sizes)
- 4 x Wall Screws with Wall Plugs
Eight screws in total, in two sets, so count them before you think something is missing: the four small ones fix your doorbell to the wedge and lock the angle you have set, and the four longer ones go into the wall with their plugs.
Designed and made in the UK by our small family workshop.
