• Set of two plastic speaker wall brackets shown with a speaker
  • Set contents: 2 vertical brackets, 2 quarter-inch UNC screws and 2 fixing screws with plugs
  • Surround speakers wall mounted either side of a TV in a living room
  • Close-up of a speaker sitting flush to the wall on the slim bracket
  • Diagram comparing a 1 cm gap to the wall with our bracket against over 5 cm with other mounts
  • Bracket holding a 4 kg kettlebell and a webcam on a wooden wall
  • Mars Outpost badge: 3D printed in bio-plastic with renewable energy, made in Europe, small family business
1 7

Mars Outpost

3D-Printed Plastic Logitech Z906 Speaker Wall Brackets (Pack of 2) - Fits Any Speaker with a 1/4-20 Thread

3D-Printed Plastic Logitech Z906 Speaker Wall Brackets (Pack of 2) - Fits Any Speaker with a 1/4-20 Thread

£10.99

Free UK delivery on orders over £25 — under that it is £1.49.

Fast UK dispatchQuality-checked before dispatchSecure checkout

Slim printed brackets that lift your surround speakers off the floor and onto the wall, sitting them just 10 mm clear of it so the room looks tidy rather than tangled.

Just 10 mm off the wall
There is no arm here and no stand-off cradle. The speaker sits 10 mm clear of the wall, close enough that from any normal angle you cannot really see what is holding it up. It is the thing owners mention to us most often.

Made for the Z906, but not only the Z906
We designed these around the Logitech Z906 satellites. What we found afterwards is how many other speakers use exactly the same fixing: a ¼-20 UNC thread, the same one on the base of a camera tripod. If your speaker has that socket, these fit it, whatever the badge on the front — which brings in surround and satellite sets from Panasonic, Boston Acoustics, Bose, Yamaha, Samsung, Sony, Klipsch and Monitor Audio among plenty of others. Worth turning your speaker over and checking for the thread before you order.

What they will carry
These are printed in plastic, so we do not quote a weight rating and we would rather you did not hang a cast-iron bookshelf speaker off one. They are built for the satellites of an ordinary surround system and they hold those comfortably. If your speakers are genuinely heavy, or you are mounting a soundbar, use our steel brackets instead — those are rated at 15 kg each.

In the set
Two brackets. Two stainless steel ¼-20 UNC screws for the speaker end, and two galvanised hard steel wall anchors with wall plugs for the wall end.

A word about plasterboard
Into brick, block or a timber stud, the supplied anchors are the right fixing. Into bare plasterboard they are not — use proper heavy-duty plasterboard anchors, or find the stud behind it. That is where wall-mounted speakers come down.

Printed by us, not bought in
3D-printed from recyclable bio-plastic by our own small family workshop — UK orders are printed and dispatched from our workshop in Bristol. Because they are printed rather than moulded, you will occasionally spot a small cosmetic imperfection — that is the making process showing, not a fault.

Covered by our lifetime warranty.

Shipping & Delivery

Standard UK delivery £1.49 – free on orders over £30.

Usually dispatched the next working day – 3–5 business days to arrive, tracked Royal Mail or courier.

We ship direct to the UK only. Full details on our Delivery & Shipping page.

Returns & Warranty

Changed your mind? Return unused items in their original condition within 30 days for a refund or replacement.

Every part is quality-checked before it ships. If anything arrives faulty or doesn't fit as described, contact us and we'll put it right.

Bought via a marketplace? Returns are handled under that marketplace's own policy.

On top of that, everything we make is covered by our lifetime warranty – if a part ever fails, we replace it, for as long as you own it.

Installer & Trade Pricing

Fitting these regularly? If you install doorbells, cameras or access control for a living – or you look after a block of flats, a letting portfolio or a site – we can do better than the single-unit price.

Tell us the models and rough quantities and we’ll come back with a quote. Repeat orders and mixed items from across the range are fine.

We also make parts to order, so if you need something that is not on the site – a different size, or a bracket for an awkward bit of kit – just ask.

Get in touch for trade pricing.

View full details

Frequently Asked Questions

Will these fit my speakers?
They were designed around the Logitech Z906 satellites, but the fixing is a standard 1/4-20 UNC thread - the same one on the base of a camera tripod - and a great many other surround and satellite speakers use it too. Turn yours over: if there is a 1/4-20 socket on the back or base, these will fit it. If there is no thread at all, they are not the right mount.
How far does the speaker sit from the wall?
10 mm. There is no arm or cradle standing the speaker off, so it sits almost flush against the wall - close enough that most people cannot see what is holding it up.
How much weight will they hold?
We do not quote a weight rating for these, because they are printed in plastic rather than pressed from steel. They are made for the satellites of an ordinary surround system and carry those comfortably. For a heavy speaker or a soundbar, use our steel speaker brackets instead - those are rated at 15 kg each.
How do they mount to the wall?
A screw goes through the bracket into the wall anchor, and your speaker bolts onto the bracket with the supplied 1/4-20 UNC screw. In brick, block or a timber stud the supplied anchors are the right fixing. In plasterboard they are not - use specialist heavy-duty plasterboard anchors, or screw into a stud.
What are they made of?
Recyclable bio-plastic, 3D-printed in our own small workshop in the UK/EU. Because they are printed rather than moulded you may spot the odd small cosmetic imperfection - that is the process showing, not a fault.
What is in the pack?
Two brackets, two stainless steel 1/4-20 UNC screws and two galvanised hard steel wall anchors with wall plugs. Enough for a stereo pair or the rear speakers of a surround set.